1、 The reasons why edge banding machines are prone to edge detachment
The possible reasons why edge banding machines are prone to edge detachment are as follows:
1. Uneven sealing glue: Uneven distribution of glue may cause some areas to not stick or bubbles to appear, making the sealing edge easy to fall off.
2. Insufficient temperature of the edge banding machine: If the temperature of the edge banding machine is too low, it may cause the adhesive to not be thick enough to stick well to the substrate, making the edge banding easy to fall off.
3. Oil stains on the surface of the substrate: If there are substances such as oil stains on the surface of the substrate, it will affect the adhesion ability of the adhesive, leading to easy detachment of the edge seal.
2、 A method to solve the problem of edge banding easily falling off
1. Adjust the uniformity of the edge banding machine's adhesive: You can check whether the adhesive wheel of the edge banding machine is evenly applied, replace or adjust the maintenance equipment in a timely manner, and strengthen the quality supervision of the edge banding adhesive.
2. Adjust the temperature of the edge banding machine: When the edge banding machine is working, pay attention to temperature adjustment to ensure that the temperature is appropriate. If the temperature is too low, the temperature can be increased appropriately to ensure that the adhesive can be evenly applied on the substrate, and to improve the adhesion force to address the problem of edge sealing easily falling off.
3. Cleaning the substrate surface: Before edge sealing, clean the substrate surface to ensure that it is clean, free of oil and dirt, which can improve adhesion and reduce the risk of edge sealing falling off.
In summary, there may be various reasons why edge banding machines are prone to falling off, but the solution is basically the same. The main approach is to check and maintain the use of the edge banding machine, ensure appropriate temperature and glue uniformity, and pay attention to the cleanliness of the substrate surface to improve the adhesion of the edge banding and reduce the problem of edge banding falling off easily.
